7 Inch Turbo Diamond Blade

7-inch turbo diamond blade for cutting granite and other hard stone on an angle grinder. 180 mm diameter with a 7/8"–20 mm–5/8" arbor so it mounts on standard grinders without a separate bushing hunt. 1.8 mm core, 2.8 mm × 8 mm turbo segments. Marked N96.

Turbo rim clears dust and slurry faster than a continuous rim and leaves a cleaner edge on granite, engineered stone, and similar materials.

Specifications

• Diameter: 7" (180 mm)
• Arbor: 7/8" / 20 mm / 5/8"
• Core thickness: 1.8 mm
• Segment: 2.8 mm × 8 mm, turbo
• ID: N96
• Typical tool: 7" angle grinder

For Use

• Confirm the grinder flange and arbor match 7/8", 20 mm, or 5/8" before you spin it.
• Do not exceed the max RPM stamped on the blade.
• Light, steady feed. Forcing the cut glazes the diamonds and can warp the core.
• Water when you can. Dry only for short cuts with good dust control.
• Inspect for cracks or missing segments before each use. Do not use a damaged blade.