14" Silent Granite Blade

350 mm (14") Silent Core Granite Blade — 60 mm Arbor, Wet Cut
Rotation ID: B4-F1#130317

Silent-core diamond blade for wet cutting granite on a bridge saw or comparable stone saw. 350 mm diameter with a 60 mm arbor. Sandwich-style silent core cuts the high-pitched ring of a standard steel core so the shop stays quieter without changing the cut.

Built for through-cuts and production slab work on granite. Water must stay on the blade the entire cut. Mount only in the rotation direction marked on the core (B4-F1#130317).

Specifications

• Diameter: 350 mm (14")
• Arbor / bore: 60 mm
• Core: silent (noise-dampened)
• Cut type: wet only
• Material: granite
• Rotation / ID: B4-F1#130317
• Typical use: bridge saw / stone fabrication saw

Use

• Wet cut granite slabs and related granite fabrication cuts
• Keep continuous water on the cut — dry running glazes the diamonds and can warp the core
• Confirm spindle speed against the RPM stamped on the blade; do not run to the stamped max unless the saw is set for that diameter
• A 50 mm bushing can be used only if the saw requires it and the bushing is seated flush; this blade is specified as a 60 mm hole

Notes for fabricators Silent core reduces noise. It does not replace correct feed rate, water volume, or bond match. If the cut smears or the saw loads up, slow the feed before you blame the blade.

If you want a shorter website version, a spec-sheet block, or this rewritten with your brand name and price, say which one.